Hign Quality Basalt micro powder grinder on Selling

Introduction of Basalt micro powder grinder

 

Basalt ingredient is silica, 3 oxidation 2 aluminium, ferric oxide, calcium oxide, magnesium oxide, which silica content most, about forty-five percent to 50 or so. Basalt color, more common for black, black, brown or dark green. Because of its dense texture, the proportion of it than general granite, limestone, sandstone and shale are heavy. Basalt, the production of "cast stone" good raw materials. "Cast stone" is the basalt after melting casting, crystallization processing, annealing and become material. It is larger than alloy steel hard and wear resistant, corrosion resistance than lead and rubber. Basalt is still in a cast steel advanced technology, which has a "lubricant" role, can prolong cast film life. At the same time, basalt can smoke into glass wool, than ordinary glass wool cloth alkali resistance is strong, high temperature resistant performance is good. Basalt is repair of highway, railway, airport runway in the stone of the best material, it has the compressive resistance, crushing value is low, the corrosion resistance is strong, asphalt adhesivity, is the development of railway transportation and highway transport best cornerstone.

Features of Basalt micro powder grinder

1. High efficiency

Under the same final size and power, the product capacity of Basalt micro powder grinder is twice than jet mill and agitation mill.

2. Longer lifetime of spare parts

The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.

3. High safety and reliability

There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.

4. High fineness of products

The product fineness can reach D97≤5μm.

5. Environment friendly

The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.

Moro iofo please visit our website

http://www.powder-grinder.com/

http://www.rollmill.net/

http://www.stone-mills.com/

http://www.powder-grinder.com/

http://www.crusher-plant.net/

Model and technical data of Basalt micro powder grinder

Model	HGM80	HGM90	HGM100	HGM100A	HGM125
Ring Diameter(mm)	800	900	1000	1000	1250
Ring Number/pcs	3	3-4	3-4	4	4
Roller Number/pcs	21	24-32	27-36	27-36	40-44
Main Shaft Speed/r. p. min	230-240	200-220	180-200	180-200	135-155
Input Size/mm	≦15
Finished Size/um	5-47(325-3000)
Capacity t/h	0.4-4.5	0.4-5.5	0.4-6.5	0.4-7.5	0.7-10
Outlet Size L*W*H/m	13.9*4*6.2	14.7*4.8*7.2	18*4.6*8.6	18*4.6*8.6	14*9*10

New Type HGM Series Three-Ring Micro Powder Mill on Selling

HGM Micro Powder Mill Description                                                

HGM Three Ring micro powder mill  is named for its three ring, it is a fine and superfine powder processing equipment, mainly suitable for the super fine powder processing of non-explosive brittle materials with medium and low hardness, and Mohs hardness below 9 degree, such as calcite, chalk and other 100 kinds of materials, finished product granularity of fine powder can be adjusted between 150-3000 mesh, the yield is up to 0.4-30 t/h.

Application of HGM Three Ring micro powder mill                                       

HGM Micro Powder Mill is suitable to grind the material with middle and low hardness such as limestone, dolomite, kaolin, talc, mica, bentonite. It is widely used in the industries like paper, rubber, plastic, packing, cosmetic, chemical products and so on.

Working principle of HGM Micro Powder Grinding Mill                                     

Vibrating feeder evenly send materials into the host and continuously grinding in mill room, after grinding, the powder will flow up by the wind machine, and classified by the classifier, the standard powder will flow through the pipe into the powder collector, the collection is separated by a valve discharge, and this is the final product.

Technical Advantages of HGM Three-ring Micro Powder Mill                                

1.It can greatly reduced the dust pollution. 

2.High efficiency and low consmption. 

3.High-end material make the machine can work long time. 

4.Evev particle size.

5.Automatic device and easy operation.

More info please visit our website                                                

http://www.micro-mill.org/

http://www.limestonegrindingmill.in/

http://www.gypsumgrindingmill.in/

http://www.baritegrindingmills.com/

http://www.raymondmill.in/

Technical Data of HGM Micro Powder Grinding Mill                                      

Model	HGM80	HGM90	HGM100	HGM125	HGM1680
Ring Diameter(mm)	800	900	1000	1250	1680
Ring Number (PCS)	3	3-4	4	4	4
Roller Number(PCS)	18-21	24-29	28-36	30-44	30-40
Capacity (t/h)	0.4-4.5	0.6-6.5	1-9	2-16	3.8-30

Good Production Cabinet Hammer Crusher on Sales

Product Description

Cabinet hammer crusher with feature of large feeding space, it is very suitable for processing big raw material with size 450-1400mm to small granularity below 100mm, which are widely used for mine, cement, building material, chemical industry and so on. It is suitable for crush raw materials with compression strength not more than 200Mpa, such as limestone, rock, plaster, coal gangue etc.

Advantages and Features

1. Large feeding size, high crushing ratio, uniform particle size,

2. The finished size can be adjusted, high productivity.

3. Durable hammers, turning type cabinet, easy maintenance.

4. Coarse and medium reduction in one time, which simplified sand-making process.

Working principle

In cabinet hammer crusher gravity, hammers do high-speed circular motion along with rotors driven by motor.

 After being fed into crusher, large stones are stacking on the shelf which is particular to box crusher. Raw materials are smashed into smaller pieces by hammers. Right following the fist crushing, unqualified pieces hit against the impact plate with new fed material at a tangent to circular motion of Hammers. So once for all, material undergo two steps of crushing, from coarse to medium size then to qualified small size. Finished product are sieved through screen and discharged at a uniform particle size.

More info please visit our website

http://www.stone-pulverizer.com/

http://rot.shclirik.com/

http://www.fine-mill.net/

http://www.ballmillsupplier.com/

http://www.ultra-mill.com/

Main Specification

Model	PC600	PC800	PC1000	PC1200
Rotor speed(r.p.mm)	600-800	650-750	650-750	600-750
Max feeding size(mm)	550	780	780	800
Finished particle size(mm)	≦50	≦50	≦50	≦50
capacity (t/h)	30-50	40-80	50-100	100-160
Powder(KW)	40-55	75-90	90-110	110-132
Weight( kg)	4200	4800	6500	8300

Gneiss Ultra Fine Powder Grinding Mill With High Quality

Introduction of our product

Gneiss ultra fine powder grinding mill is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials. 

Features of gneiss ultra fine powder grinding mill

1.High efficiency: Under the same finished final size and the same motor power, the capacity of stone micronizer is twice as much as jet mill, mixing grinder and ball mill.

2.Long lifecycle of spare parts: The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.

3.High safety and reliability: As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

4.High fineness and flexible adjustment: The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97≦5um.

5.Environment-friendly: The application of pulse deduster and muffler greatly alleviates dust pollution and noise.

More info please visit our website

http://www.ultra-mill.com/

http://www.stone-pulverizer.com/

http://rot.shclirik.com/

http://www.fine-mill.net/

http://www.ballmillsupplier.com/

Gneiss ultra fine powder grinding mill

Model	HGM80	HGM90	HGM100	HGM100A	HGM125
Ring Diameter(mm)	800	930	1035	1035	1300
Ring Number (PCS)	3	3-4	3	4	4
Roller Number(PCS)	21	24-32	27	34-36	40-44
Main Shaft Speed (r. p. min)	230-240	200-220	180-200	180-200	135-155
Input Size (mm)	≤20
Finished Size (um)	5-47(325-2500)
Capacity (t/h)	0.5-4.5	0.6-6.5	0.7-7	1-8.5	1.5-12
Outlet Size L*W*H (m)	13.9*4*6.2	14.7*4.8*7.2	18*4.6*8.6	18*4.6*8.6	14*9*10.25