grinding mill online: 十一月 2016

2016年11月16日星期三

Good Production Cabinet Hammer Crusher on Sales

Product Description

Cabinet hammer crusher with feature of large feeding space, it is very suitable for processing big raw material with size 450-1400mm to small granularity below 100mm, which are widely used for mine, cement, building material, chemical industry and so on. It is suitable for crush raw materials with compression strength not more than 200Mpa, such as limestone, rock, plaster, coal gangue etc.

Advantages and Features

1. Large feeding size, high crushing ratio, uniform particle size,

2. The finished size can be adjusted, high productivity.

3. Durable hammers, turning type cabinet, easy maintenance.

4. Coarse and medium reduction in one time, which simplified sand-making process.

Working principle

In cabinet hammer crusher gravity, hammers do high-speed circular motion along with rotors driven by motor.

After being fed into crusher, large stones are stacking on the shelf which is particular to box crusher. Raw materials are smashed into smaller pieces by hammers. Right following the fist crushing, unqualified pieces hit against the impact plate with new fed material at a tangent to circular motion of Hammers. So once for all, material undergo two steps of crushing, from coarse to medium size then to qualified small size. Finished product are sieved through screen and discharged at a uniform particle size.

More info please visit our website

http://www.stone-pulverizer.com/

http://rot.shclirik.com/

http://www.fine-mill.net/

http://www.ballmillsupplier.com/

http://www.ultra-mill.com/

Main Specification

Model	PC600	PC800	PC1000	PC1200
Rotor speed(r.p.mm)	600-800	650-750	650-750	600-750
Max feeding size(mm)	550	780	780	800
Finished particle size(mm)	≦50	≦50	≦50	≦50
capacity (t/h)	30-50	40-80	50-100	100-160
Powder(KW)	40-55	75-90	90-110	110-132
Weight( kg)	4200	4800	6500	8300

2016年11月14日星期一

Gneiss Ultra Fine Powder Grinding Mill With High Quality

Introduction of our product

Gneiss ultra fine powder grinding mill is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials.

Features of gneiss ultra fine powder grinding mill

1.High efficiency: Under the same finished final size and the same motor power, the capacity of stone micronizer is twice as much as jet mill, mixing grinder and ball mill.

2.Long lifecycle of spare parts: The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.

3.High safety and reliability: As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

4.High fineness and flexible adjustment: The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97≦5um.

5.Environment-friendly: The application of pulse deduster and muffler greatly alleviates dust pollution and noise.